Shengmilo NOKEE-U - Push-assistance Mode Operation; Headlight Control

7
◆Switching Push-assistance Mode On/Off
To activate the push-assistance function, hold the [DOWN] button always. The E-bike’s
drive is activated at a uniform speed of 6 Km/h. And “WALK” shows on the screen.
The push-assistance function is switched off as soon as you release the [DOWN] button on the
operating unit.
Push-assistance Mode
■Push-assistance function may only be used when pushing the E-bike. The danger of injury
when
the wheels of the E-bike do not have ground contact while using the push-assistance function.
◆Turn on/off headlights
To turn on the headlights, press the [UP] button for 2 s. When the logo appears on the
display, it will light up. Press the [UP] button again for 2 s to turn off the headlights.
Switching the Lighting On/Off Interface