To Next PageTo Next Page
Need help?Do you have a question about the Shimaden SRS12A and is the answer not in the manual?
General| Control Method | PID control |
|---|---|
| Display | LED display |
| Size | 1/16 DIN |
| Input Type | Thermocouple, RTD, Voltage, Current |
| Output Type | Relay, Voltage pulse, Current |
| Power Supply | 100 to 240 VAC, 50/60 Hz |
| Accuracy | ±0.3% of full scale +1 digit |
| Operating Temperature | 0 to 50°C |
| Dimensions | 48 x 48 x 78 mm (1.89 x 1.89 x 3.07 in) |
Critical safety warnings regarding electrical shock and potential hazards.
Important cautions to prevent equipment damage, fire, and malfunctions.
Guide to setting and adjusting target set values (SV).
How to manually set and control output values.
Detailed explanation of auto-tuning execution, cancellation, and conditions.
Setting event types and their corresponding values for alarms.
Setting PID parameters for Output 1.
Further details on PID parameters for outputs 1 and 2.
Setting analog output type, scaling, and limiter values.
Configuring communication mode, address, data format, speed, and master mode.
Table mapping input types to specific measuring ranges in °C and °F.
How heater break/loop alarms work with CT input.
Explanation of output limiters, cycling time, characteristics, and two-position action.
Conditions that initiate and cancel the soft start feature.
Identifying and resolving common operational problems.
Diagnosing and fixing errors related to abnormal input and heater alarms.
