Shimaden SRS14A - User Manual

Request
The instruction manual should be kept in a handy place where the end user can refer to it when necessary.
Preface
This instruction manual (detailed version) was written for those who perform wiring, installation, and routine
maintenance for the SRS10A (SRS11A/SRS12A/SRS13A/SRS14A) Series.
This manual contains a description of the operating method, functions, wiring, mounting method, and precautions
when handling the SRS10A (SRS11A/SRS12A/SRS13A/SRS14A) Series (hereinafter referred to as the SRS10A
Series unless a separate description is required). You should, therefore, keep it handy to refer to it when operating
and handling the equipment.
Be sure to observe all precautions and adhere to the procedures provided herein.
SRS10AF-1ME
Apr. 2021
SRS10A Series
(SRS11A / SRS12A / SRS13A / SRS14A)
Digital Controller
Instruction Manual (Detailed Version)
Thank you for purchasing a Shimaden Digital Controller. After making sure the product fits the desired description,
you should carefully read the instructions and get a good understanding of the contents before attempting to operate
the equipment.

Shimaden SRS14A Specifications

General

Control Method	PID control
Weight	Approx. 200g
Input Type	Thermocouple, RTD, Voltage, Current
Output Type	Relay, Voltage pulse, Current
Power Supply	100 to 240VAC, 50/60Hz
Display	LED display
Operating Temperature	-10 to 50°C

Summary

Safety and Introduction

1. Safety rules

Essential safety guidelines, warnings, and cautions for equipment operation.

2. Introduction

Overview of the controller, preliminary checks, and basic usage notes.

Installation and Wiring

3. Installation and wiring

Covers site conditions, mounting, wiring, and terminal layouts for installation.

3-7. Operation preparations

Steps for initial setup and checks before operating the controller.

Controller Interface and Parameters

4. Names and functions of parts on front panel

Explanation of displays, indicators, and operating keys on the controller.

5. Parameter diagram and setting

Visual guide to parameter screens, navigation, and setting procedures.

5-2. Display when power is applied

Describes the initial display sequence upon powering the controller.

5-3. Switching screens

How to navigate between different screen groups and within screens.

5-5. Screen group 0 setting

Configuration of basic settings, target values, manual output, and auto tuning.

5-5. Event Settings and Multi-SV Configuration

Configuring alarms, events, and managing multiple target set values.

Functional Explanations and Troubleshooting

6. Screen explanation and setting items

Detailed descriptions of various operational screens and their specific settings.

7. Measuring Range Codes

Table mapping input types to measuring ranges for configuration.

8. Explanation of functions

Detailed breakdown of event functions, PID control, output characteristics, and external inputs.

9. Causes and remedy of trouble and errors

Identifying common problems, errors, and their solutions.

Parameter Management, Record Keeping, and Specifications

10. Parameter mask;lock function

Managing parameter visibility and key lock settings for security.

11. Parameter setting record

Template for documenting controller settings and configurations.

12. Specifications

Comprehensive technical data, dimensions, performance, and certifications.