To Next PageTo Next Page
Need help?Do you have a question about the Shimaden SRS11A and is the answer not in the manual?
General| Control Method | PID control |
|---|---|
| Output Type | Relay, Voltage pulse, Current |
| Accuracy | ±0.3% of full scale |
| Operating Temperature | 0 to 50°C |
| Input Type | Thermocouple, RTD |
| Display | Digital display |
| Power Supply | 100-240V AC, 50/60Hz |
Check the specification code/appearance and ensure all accessories are present and undamaged.
Specifies environmental conditions for optimal controller operation, including temperature, humidity, and pollution.
Explains the wiring procedures, precautions, and specific connection methods, including noise filter use.
Illustrates the terminal layout for different SRS10A series models for correct wiring.
Lists terminal numbers and their corresponding functions or inputs/outputs for various models.
Instructions on how to set or modify target set values (SV) using the basic screen and keys.
Describes how to switch between automatic and manual control output modes and adjust settings.
Explains the function and execution process for automatic PID parameter tuning.
Details the controller's standby mode for temporarily halting execution and its operation.
Covers the setup of event types (alarms) and their corresponding values for specific alarm conditions.
Details the functionality and setup for heater break and loop alarms, requiring CT input or event options.
Explains control output settings like limiters, cycling time, characteristics, and two-position action.
Covers the configuration and functions of external control inputs (DI), including execution control and SV selection.
Provides a troubleshooting guide for common problems and their solutions, including error messages.
Details specific error displays, their causes, and recommended remedies, such as abnormal input or alarms.
Outlines control modes, PID parameters, output characteristics, and manual control specifications.
