Shimadzu LC-40D X3 CL - 2 Parts Identification and Function; 2.1 Front Panel

3.5.3 [CONTROL] Setting Group .................................... 37
3.5.4 [SYSTEM] Setting Group ...................................... 38
3.5.5 [UTILITY] Setting Group ....................................... 44
3.5.6 [FILE] Operation Group ........................................ 46
3.6 VP Functions Screen ........................................... 47
3.6.1 List of VP Functions .......................................... 47
3.6.2 Product Information Group (PRODUCT INFO) ................ 49
3.6.3 Maintenance Information Group (MAINTENANCE) ........... 49
3.6.4 Validation Support Information Group (VALIDATION) ........ 53
3.6.5 Calibration Support Information Group (CALIBRATION) ...... 61
3.7 Creating Time Program ...................................... 69
3.7.1 Time Program Command List ................................. 69
3.7.2 Time Program Setting Screen ................................. 70
3.7.3 Creating a Time Program ..................................... 71
3.7.4 Creating a Low-Pressure Gradient Program .................. 73
3.7.5 Deleting a Step ............................................... 74
3.7.6 Starting and Stopping a Time Program ...................... 74
3.7.7 Commands Used for Time Programs Only ................... 75
3.8 Delivery in the Low-Pressure Gradient Mode ....... 76
3.8.1 Set Value ...................................................... 76
3.8.2 Preparation for Delivery ....................................... 76
3.9 Connection with the System Controller or
Workstation ...................................................... 78
3.9.1 Setting the Instrument ........................................ 78
3.9.2 Basic Parameters .............................................. 78
3.10 Connection to External Input/Output
Terminals .......................................................... 78
4
Maintenance
4.1 Periodic Inspection and Maintenance .................. 79
4.1.1 Prior to Inspection and Maintenance ......................... 79
4.1.2 List of Periodic Inspection and Maintenance ................. 82
4.1.3 Check after Inspection and Maintenance .................... 83
4.2 Removing the Right Panel Cover and the Filter
Holder .............................................................. 84
4.3 Removing/Installing the Pump Heads ................... 85
LC-40D X3 CL LC-40D XR CL
v
Contents