Shimadzu LC-40D X3 CL User Manual

the tubes bound at the front right from the tube holder to prevent them from
interfering with the work.
"4.2 Removing the Right Panel Cover and the Filter Holder" P.84
n Standard Reagents for Maintenance
Solvent Description Inspection/Maintenance Item
2-propanol Used for cleaning parts.
"4.4 Replacing the Plunger
Seal" P.92
"4.5 Cleaning/ Replacing the
Plunger and Diaphragm"
P.100
"4.6 Rinsing the Check Valve"
P.107
"4.7 Performing an Ultrasonic
Cleaning of the Check Valve"
P.110
"Gradient Mixer for
High-Pressure Gradient
Analysis"
"4.12 Replacing the Drain
Valve" P.119
"4.16 Cleaning of the
Automatic Rinsing Kit" P.123
n Hardware Maintenance Supplies
Note that in addition to the following tools and parts are also required. The tools and
parts required for the maintenance of each part are listed at the beginning of each
section.
Item
Description Inspection/Maintenance Item
Protective glasses
Glasses and gloves before
the maintenance.
ALL Inspection/Maintenance
Gloves
Wiping paper
Used for wiping and
cleaning parts.
"4.4 Replacing the Plunger
Seal" P.92
"4.5 Cleaning/ Replacing the
Plunger and Diaphragm"
P.100
Beaker Used for cleaning parts.
"4.4 Replacing the Plunger
Seal" P.92
Ultrasonic bath Used for cleaning parts.
"4.4 Replacing the Plunger
Seal" P.92
"4.7 Performing an
Ultrasonic Cleaning of the
Check Valve" P.110
"Gradient Mixer for
High-Pressure Gradient
Analysis"
"4.16 Cleaning of the
Automatic Rinsing Kit"
P.123
80
LC-40D X3 CL LC-40D XR CL
4 Maintenance

Shimadzu LC-40D X3 CL Specifications

General

Brand	Shimadzu
Model	LC-40D X3 CL
Category	Laboratory Equipment
Language	English