Shimano Steps EW-SW100 - Charging the Battery Attached to the Bicycle

14
 Charging the battery attached to the bicycle
Charge the battery with the battery charger placed on the floor or some other stable surface. Fix the bicycle in place when charging, so
that it does not tip over.
1. Connect the battery charger’s power plug to the electrical outlet.
2. Insert the charging plug into the charging port on the battery mount or battery.
BT-E6000 / BT-E6001
Battery mount
Charging port
Charging plug
Battery
BT-E8020
Battery
Charging plug
Charging port
Battery
Charging plug
Battery mount
Charging port
BT-E6010 BT-E8010 / BT-E8014 / BT-E8016
Battery
Charging port
Charging plug
BT-E8035 / BT-E8035-L / BT-E8036
• The position of the satellite charging port differs
depending on the bicycle.
Charging plug
Charging port