26
BT-E8035 / BT-E8035-L / BT-E8036
1.
Turn the power OFF.
If there is a keyhole cap, open it.
*
The position and operation of the power switch differ depending on
the bicycle.
Power switch
2.
Release the battery lock.
(1) Insert the key into the key cylinder of the battery mount.
(2) Support the battery with your hand, and turn the key clockwise.
The battery is unlocked. The double latch plate retains the battery in the designated position and prevents it from falling
out.
If the battery does not go down into the designated position, pull out the battery with your hand while turning the key.
(1) (2)
Key cylinder
Key
NOTICE
• If the battery is retained with a double latch plate, the double latch plate could deform if struck by a strong external force, causing the battery to drop.
• A hexagon wrench may be used instead of a key, depending on the model. Unlock by turning it
90° clockwise, as shown in the figure. Do not forcibly turn it counterclockwise, or turn it more
than 90° clockwise. Doing so may damage it.
90°
To Next Page
Loading...
