5
•
Do not let the battery touch the same area of skin for
an extended period of time while it is charging. The
temperature of components may reach 40 to 70°C,
which can cause low-temperature burns.
•
Periodically check the battery charger and adapter, particularly
the cord, plug, and case, for any damage. If the charger or
adapter is broken, do not use it until it has been repaired by
the place of purchase or distributor.
•
Use the product under the supervision of someone responsible
for safety and upon receiving usage instructions. Do not allow
physically, sensory, or mentally impaired persons,
inexperienced persons, or persons with no required
knowledge, including children, to use the product. Do not
allow children to play near the product.
NOTICE
Charging can be carried out at any time, regardless of
the remaining battery, but please fully charge the
battery in the following cases:
•
The battery cannot be used at the time of purchase. Before
riding, be sure to fully charge the battery.
If the battery has become completely empty, charge it as soon as
possible. If you leave the battery without charging it, the battery
will deteriorate and may become unable to be used.
Handling the battery
•
If the screen of the cycle computer is not displayed, fully
charge the battery. The battery level may affect the display.
•
If the LED display of the battery does not turn on even when
the battery power switch is pressed, the protection circuit may
have activated. Connect the battery charger to deactivate the
protection circuit.
•
If the battery is charged in a low-temperature environment of
5°C or lower, the traveling distance of a full charge will be
shorter. Also, if the battery is used in a low-temperature
environment of 5°C or lower, the battery consumption will
become quicker. This is due to the characteristics of the
battery, and the battery will return to normal when at a
normal temperature.
•
Riding with a high level of assistance in a low-temperature
environment when the battery level is low may cause the
battery level to drop to 0%, due to the characteristics of the
battery. Charge it before use.
Handling the battery charger
•
The battery can be charged at temperatures between 0°C and
40°C. The battery charger will not operate at temperatures
outside the range. It will display an error. (The battery charger
LED lamp flashes.)
Do not use in environments with high humidity. (EC-E8004)
•
Do not use outdoors or in environments with high humidity.
(Battery charger other than the EC-E8004)
Charge the battery in a location not exposed to rain or wind.
(EC-E8004)
•
Charge the battery indoors to avoid exposure to rain or wind.
(Battery charger other than the EC-E8004)
•
Do not place the battery charger on dusty floors when using
it.
•
Place the battery charger on a stable surface such as a table
when using it.
•
Do not place any objects on top of the battery charger or its
cable. Also do not cover them with a cloth or other material.
•
Do not bundle the cables.
•
Do not hold the battery charger by the cables when carrying
it.
•
Do not apply excessive tension to the cable and charging plug.
•
In order to prevent the cable from being damaged, avoid
wrapping it around the main body during storage.
•
Do not wash the battery charger or wipe it using detergents.
•
Do not allow children to play near the product.
•
When charging with the battery installed to a bicycle, take
care that your legs, etc. do not get caught in the battery
charger cord. Doing so may cause injury or cause the bicycle
to fall over and break the components.
•
When charging the battery while it is mounted on the bicycle,
be careful of the following:
-
Before charging, check that there is no water on the
charging port of the charging plug.
-
Check that the battery mount is locked before charging.
-
Do not remove the battery from the battery mount while
charging.
-
Do not ride with the charger mounted.
-
Close the cap on the charging port when not charging.
-
Fix the bicycle in place when charging, so that it does not
tip over.
•
Make sure to close the charging port cap after charging. If
foreign matter such as dirt or dust adheres to the charging
port, there is a risk that the charging plug will not fit into the
charging port.
To Next Page
Loading...
