Shimano Steps SM-BCC1 User Manual

12
(C)
Cycle computer / Junction [A]
• SC-E6100
• SC-E7000
• EW-EN100
(H)
Battery (down-tube mount type)
• BT-E6010
• BT-E8010
*3
• BT-E8014
(D)
Assist switch
• SW-E6010
• SW-E7000
(I)
Battery mount
(down-tube mount type)
• BM-E6010
• BM-E8010
(E)
Drive unit • DU-E5000
(J)
Battery (Integrated type) • BT-E8020
(F)
Battery (rear carrier mount type)
• BT-E6000
• BT-E6001
*3
(K)
Battery mount (Integrated type) • BM-E8020
(G)
Battery mount (rear carrier mount
type)
• BM-E6000
(L)
Battery charger
* 1: EC-E6002 + SM-BCC1 + SM-BTE60
* 2: EC-E6000 + SM-BTE60
*3 If the firmware version of the drive unit is 3.2.6 or lower, the battery may not operate properly. Update the firmware
version via E-TUBE PROJECT.
Specifications
Operating temperature
range: During discharge
-10 – 50˚C Battery type Lithium ion battery
Operating temperature
range: During charging
0 – 40˚C Nominal capacity
Refer to the user's manual
for the battery. For the
latest information on
manuals, see the website
(http://si.shimano.com).
Storage temperature -20 – 70˚C Rated voltage 36 V DC
Storage temperatur
e
(Battery)
-20 – 60˚C Drive unit type Midship
Charging voltage 100 – 240 V AC Motor type Brush-less DC
Charging time
Refer to the user's manual
for the battery or
information on the battery
charger. For the latest
information on manuals, see
the website
(http://si.shimano.com).
Rated drive unit power 250 W
* The maximum speed for which power assistance is provided is set by the manufacturer and is conditional on where the
bicycle is to be used.

Shimano Steps SM-BCC1 Specifications

General

Brand	Shimano Steps
Model	SM-BCC1
Category	Switch
Language	English