Shimano Steps SM-BCC1 User Manual

59
 Error messages on the cycle computer
Warnings
This disappears if the error is fixed.
Code
Display
preconditions
Operational restrictions
while warning is
displayed
Remedy
W011
The traveling speed
cannot be detected.
The maximum speed up to
which power assistance is
provided may decrease.
(Power assistance is provided
up to 25 km/h in top gear.)
Check that the speed sensor is properly installed.
If the situation does not improve, contact the place of
purchase.
W013
Initialization of
torque sensor was
not completed
successfully.
Power assistance may
be lower than usual.
With your foot off the pedal, press the battery power
button and turn on the power again.
If the situation does not improve, contact the place of
purchase.
W032
An electronic
derailleur may have
been installed in
place of a
mechanical
derailleur.
Power assistance
provided in [WALK]
mode may be lower
than usual.
* The walk assist mode
function may not
available in certain
regions.
Reinstall the derailleur for which the system is
configured to support.
If the situation does not improve, contact the place of
purchase.

Shimano Steps SM-BCC1 Specifications

General

Brand	Shimano Steps
Model	SM-BCC1
Category	Switch
Language	English