Shimano Steps SM-BCC1 User Manual

61
Code
Display
preconditions
Operational restriction when
an error is being displayed
Remedy
E022
Battery connected
to drive unit does
not conform with
system standards.
Power assistance is not
provided during riding.
Contact your place of purchase or a local bicycle
dealer for assistance.
E030
The installed
shifting component
differs from the
component
configured in the
system.
Power assistance is not
provided during riding.
Contact your place of purchase or a local bicycle
dealer for assistance.
E033
The current
firmware is not
compatible with
this system.
Power assistance is not
provided during riding.
Connect to E-TUBE PROJECT, then update the
firmware for all units to the latest version.
E043
Part of the cycle
computer’s
firmware may be
damaged.
Power assistance is not
provided during riding.
Contact the place of purchase or bicycle dealer.
 Error indications (EW-EN100)
If an error occurs, both LEDs of the EW-EN100 blink rapidly at the same time as shown below.
LED lamps indications
Inner side Outer side
Blinks fast in red Blinks fast in red
If the above occurs, immediately turn off the power then
consult the place of purchase or a bicycle dealer.
LED lamp
(outer side)
LED lamp
(inner side)

Shimano Steps SM-BCC1 Specifications

General

Brand	Shimano Steps
Model	SM-BCC1
Category	Switch
Language	English