EasyManuals Logo

Shimano Steps SM-BCC1 User Manual

Shimano Steps SM-BCC1
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
57
Connection and communication with devices
The system can be configured and firmware can be updated when the bicycle is connected to a device (PC/tabret).
You need E-TUBE PROJECT to configure SHIMANO STEPS and update firmware.
Download an E-TUBE PROJECT from the support website (http://e-tubeproject.shimano.com).
For information on how to install an E-TUBE PROJECT, check the support website.
Connecting to devices is not possible while charging.
You need SM-PCE1/SM-PCE02 and SM-JC40 / JC41 to connect SHIMANO STEPS to a PC.
Firmware is subject to change without notice.
If necessary, contact the place of purchase.
About wireless functions
Functions
The latest functions can be checked by updating the software via E-TUBE PROJECT. For details, consult the place of purchase.
ANT connection
The wireless unit transmits all the information from the main screen of the cycle computer.
Bluetooth
®
LE connection
E-TUBE PROJECT for smartphones/tablets may be used if a Bluetooth LE connection is established using a smartphone/tablet.
How to make a connection
To make a connection, the device connected to SC-E6100, SC-E7000 or EW-EN100 needs to be in connection mode. For
information on how to switch the device to connection mode, refer to the manual for the device.
2.4 GHz digital wireless system
2.4 GHz-frequency digital wireless technology is the same technology used for wireless LAN communication.
However, on very rare occasions, the following and places may generate strong electromagnetic waves and interference,
which may result in incorrect measurements.
When near televisions, computers, radios and motors/engines, or when riding in car and trains.
When near railroad crossings or railway tracks, and around television transmitting stations and radar bases.
Around other wireless computers or digitally controlled light.
Specifications for wireless system
Model no. SC-E6100 SC-E7000 EW-EN100
Frequency band 2402–2480 MHz 2402 - 2480 MHz 2402–2480 MHz
Maximum radio-frequency power +4 dBm +4 dBm +4 dBm
Firmware version 4.0.0 4.0.0 4.0.0

Table of Contents

Other manuals for Shimano Steps SM-BCC1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shimano Steps SM-BCC1 and is the answer not in the manual?

Shimano Steps SM-BCC1 Specifications

General IconGeneral
BrandShimano Steps
ModelSM-BCC1
CategorySwitch
LanguageEnglish

Related product manuals