53
[Shift timing] automatic shift timing setting
Adjust the shift timing of the automatic shift mode.
This setting is used when shifting advice is displayed during manual shift mode.
1.
Enter the [Shift timing] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Shift timing],
then press Function button.
If using SW-E6010, control is also possible with
Assist-A.
2.
Press Assist-X or Assist-Y to adjust the values.
•
Pressing Assist-X to increase the value adjusts shift
timing to make pedaling easier.
•
Pressing Assist-Y to decrease the value adjusts shift
timing to make pedaling harder.
Assist
< SC-E6100 >
< SC-E7000 >
3.
Press Function button to confirm the setting.
If using SW-E6010, control is also possible with
Assist-A.
*
The screen will automatically return to the setting
menu screen.
Assist
Function button
To Next Page
Loading...
Need help?
General
