46
[Backlight] backlight setting (SC-E6100 only)
Configure the display backlight.
1.
Enter the [Backlight] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Backlight], then
press Function button.
If using SW-E6010, control is also possible with
Assist-A.
2.
Press Assist-X or Assist-Y to move the cursor to the
item you want to configure.
Assist
Configurable items Details
[ON] Always turned on
[OFF] Always turned off
[MANUAL]
Turns on and off in
conjunction with the
battery-powered light
3.
Press Function button to confirm the setting.
If using SW-E6010, control is also possible with
Assist-A.
*
The screen will automatically return to the setting
menu screen.
Assist
Function button
To Next Page
Loading...