72
Return to index page
O-ring
Brake shoe unit
Slide spring
Hub shell
Upper side Lower side
16. Install the O-ring.
17. Install the brake shoe unit.
18. Install the hub shell.
NOTICE
•
Keep the vertical direction of the
brake shoe unit in mind as you install
it.
NOTICE
•
It is recommended that you wrap the
threads with tape before installing
the O-ring to prevent damage to the
O-ring contacting the axle threads.
Install so that the end of the slide spring on the
hub fits into the gap in the brake shoe.
Be careful that the slide spring inside the hub
shell does not touch the convex section of the
internal assembly.
Assembling the Internal Assembly
To Next Page
Loading...
