Bracket installation type cycle computer
For model: SC-EN610
The bracket used to secure the cycle computer to the handlebar, and the cycle computer itself are separate parts.
Installation layout
A bracket installation type cycle computer can be installed to the handlebar with layouts like those indicated in
the figures.
Front Front
When placing the cycle computer on
the stem
When placing the cycle computer on the
front of the handlebar
The procedure from here describes an example of placing the cycle computer on a stem such as that indicated in
the figure on the left.
Adjust the installation angle, and secure the cycle computer to the handlebar.
Front
Clamp screw
0.8 N·m
30°
15°
2.
Installation/removal
Installing the cycle computer
20
To Next Page
Loading...
Need help?
General