RB-473-B02M
21
(4) Press Memory/Add switch to store
the measurement values of S, C, A
and prism in memory.
The measurement values will be shown
in red at this time. Then, the values will be fixed.
To erase the data in the memory,
press .
Press to print out the values.
Great care should be taken not to give strong impact to the lens when lowering
the lens holder.
Confirm that the lens holder is locked at the top when pushing it up.
S
C
A
Px
Py
-2.00
0.00
0
O 0.00
D 0.00
±
.
S
Cyl StepAbbe
※When setting “Auto Memory” “ON” on the set up screen and the messege
“Marking OK” appears, the data will be saved in memory automatically.
To Next Page
Loading...
Need help?
General