RB-473-B02M
7
2. Installation Environment
1) Do not expose the optic parts, i.e. lens stand, directly to
sunlight or bright light from other sources.
Strong light or glare to the instrument may cause the
failure of measurement.
2) Do not install the instrument in places where either dust
or rubbish may accumulate.
3) Environments with extremes in heat and humidity
should also be avoided.
Temperature range for use: 10C ~ 40C
Temperature range for storage: -10C ~ 60C
Humidity range for use/storage: 70%HR (no dew condensation allowed)
4) Keep away from inflammable or explosive gases as well as storage areas of medical supplies and
chemicals.
5) Keep away from sites that experience strong vibrations
or sudden shocks.
6) Malfunction is likely to occur if the instrument is not
properly stabilized of accidentally overturns. To prevent
internal/external damage caused by sudden impact,
install the instrument on a surface that is solid and
secure. Do not store in high, ‘out of reach’ places.
Gases
To Next Page
Loading...
Need help?
General