RB-473-B02M
3
The power cord must be grounded at all time.
Avoid damaging the power cord (such as bending it in an extremely small size, pulling, placing a
heavy object on it). When the power cord is damaged (breaks, damage of cover, etc), replace it to a
new cord to prevent any electric shock or fire from ocurring.
Insert the power cord firmly into the outlet and the instrument. If not, fire or electric shock may occur.
Keep the power cord clean without any dust or oil on it. The dirty terminal may cause malfunction or
fire.
When the power cord becomes hot after used, check for the dirt at the terminal part. If you find no dirt,
replace the power cord to a new cord. The dirty terminal may cause malfucntion or fire.
Always use SLM-5000 with the rated powe voltage. Using the instrument out of the rated voltage
range may cause malfunction or fire.
When pluging and unpluging the power cord,
always hold the plug.
Do not touch the plug when your hands are wet.
When the instrument is not used for a long time,
unplug the power cord from the outlet.
Precautions on power source
To Next Page
Loading...
Need help?
General