99(107)
6. Maintenance and Repair
Pay attention to the following rules during maintenance:
1) Please reduce the temperature to room temperature (below50℃), cut off
power supply and drain oil and water first while inspecting the machine; carry
out operations with safety gloves on after complete confirmation of spaces for
inspection and maintenance.
2) It is necessary to carry out periodic inspections in order to prolong service life
of the system and prevent from safety accidents.
(Please note that it is dangerous to check or tear down the machine during
operation.)
6.1 Open the Covers
1) Open the top covers of the unit. (Refer to the pictures below)
Picture 6-1：Open the Covers 1
To Next Page
Loading...
