Shure BLX1 User Manual

Shure Incorporated
3/25
•
•
•
•
•
•
•
•
•
•
1. 1.
2.
2.
3. 1.
This symbol indicates that there are important operating and maintenance instructions in the
literature accompanying this unit.
WARNING: Danger of explosion if incorrect battery replaced. Operate only with AA batteries.
System Components
Note: Your system comes with a combination of the following components.
BLX1 Bodypack Transmitter
BLX2 Handheld Transmitter (choice of SM58, BETA58A, or PG58)
BLX4 Wireless Receiver
BLX88 Dual Wireless Receiver
PS24 Power Supply
Lavalier microphone (choice of PG185, WL185 or WL93)
Headworn microphone (choice of PG30, SM31FH or SM35)
MX153 Earset microphone
Instrument microphone (BETA98H/C)
Guitar cable (WA302)
Quick Start Guide
Connect receiver to power source.
Connect receiver to mixer or amplifier. Hold power button to turn on.
Press group button on receiver to perform a group scan.
Install batteries and turn on transmitter.

Shure BLX1 Specifications

General

RF power	10 mW
Form factor	Bodypack transmitter
Product color	Black
Built-in display	No
Housing material	Plastic
Maximum outdoor range	91 m
Operating frequency type	Ultra High Frequency (UHF)
Radio Frequency (RF) range	662 - 686 MHz
Operating temperature (T-T)	-18 - 57 °C
Microphone frequency response	50 - 15000 Hz
Total Harmonic Distortion (THD)	0.5 %
Battery type	AA
Battery voltage	1.5 V
Battery life (max)	14 h
Number of batteries supported	2

Weight and Dimensions

Depth	21 mm
Width	64 mm
Height	110 mm
Weight	75 g