Shure GLXD2 - Charging from an AC Power Source; Charging from a USB Port; LED Status During Charging

Shure Incorporated
16/37
1.
2.
1.
2.
•
•
•
•
Charging from an AC Power Source
Plug the charging cable into the charging port on the transmitter.
Plug the charging cable into an AC power source.
Charging from a USB Port
Plug the USB charging cable into the charging port on the transmitter.
Plug the cable into a standard USB port.
LED Status During Charging
The following LED states indicate battery status when the transmitter is connected to a charger:
Green = charging complete
Green Flashing = battery charge > 90%
Red = battery charging
Amber Flashing = battery error, replace battery
Installing Transmitter Batteries
Important: Always fully charge a new battery before first use.