Shure GLXD2 - Remote Antenna Placement

Shure Incorporated
21/37
•
•
•
•
•
•
•
◦
◦
◦
•
•
Additional Tips
Do not place competitive 2.4 GHz receivers near GLXD4R receivers.
Connect more than two GLXD4R receivers to a GLX-D Frequency Manager to improve RF reliability.
Scan for the best available channel by pressing the channel button.
Keep transmitters more than 2 meters (6 feet) apart. This is less critical with shorter receiver-to-transmitter distances or if
receivers are connected to a GLX-D Frequency Manager.
Note: If transmitters are within 6 inches of non-GLX-D transmitters or microphone cartridges, audible noise is possible.
Move transmitter and receiver away from metal or other dense materials.
During sound check, mark trouble spots and ask performers to avoid those areas.
If there is a strong source of Wi-Fi and you specifically want to use frequencies within that Wi-Fi channel, use the following
Group/Channel combinations (best option listed first):
Wi-Fi 1: Group 3/Channel 8, Group 3/Channel 4
Wi-Fi 6: Group 3/Channel 7, Group 3/Channel 5
Wi-Fi 11: Group 3/Channel 2, Group 3/Channel 1
Remote Antenna Placement
Follow these guidelines when mounting antennas remotely:
Reduce distance between transmitter and antenna.
Mount antennas farther from each other to improve performance.