Shure GLXD4 User Manual (English)

Other manuals for Shure GLXD4

User Guide100 pages

User Manual14 pages

Questions and Answers:

J
Joyce JohnsonAug 30, 2025
What to do if I hear audio artifacts or dropouts on my Shure Receiver?
- C
  Christian ShafferAug 30, 2025
  If you are experiencing audio artifacts or dropouts with your Shure Receiver, try the following: * Change the receiver and transmitter to a different group and/or channel. * Identify and remove any nearby sources of interference, such as cell phones, Wi-Fi access points, or signal processors. * Charge or change the transmitter battery. * Make sure the receiver and transmitter are within the recommended system parameters. * Ensure the system is set up within the recommended range and the receiver is kept away from metallic surfaces. * Position the transmitter within line of sight of the receiver for optimal sound.
T
Timothy DavisAug 29, 2025
What to do if I can't adjust the gain control on my Shure Receiver?
- T
  Thomas SnyderAug 29, 2025
  If the receiver gain control cannot be adjusted, check the transmitter. The transmitter must be on to enable gain changes.
G
Gabriela RichardsonAug 28, 2025
What to do if sound level varies when switching sources on my Shure GLXD4?
- R
  Raymond KennedyAug 28, 2025
  If you experience sound level variations when switching to different sources, adjust the transmitter gain as necessary (see Gain Adjustment).
H
henry55Aug 27, 2025
How to fix distortion on Shure Receiver?
- M
  Michael SwansonAug 27, 2025
  To fix distortion, reduce transmitter gain (see Gain Adjustment).
S
Shannon MccarthyAug 26, 2025
What to do if there is no sound or faint sound from my Shure Receiver?
- B
  bryanttammyAug 27, 2025
  If you experience no sound or faint sound, here are some things to check: * If the Receiver RF LED is on, verify all sound system connections or adjust gain as needed. Also, verify that the receiver is connected to mixer/amplifier. * If the Receiver RF LED is off, turn on the transmitter. Make sure the batteries are installed correctly. Link transmitter and receiver. Charge or change transmitter battery. * If the Receiver LCD screen is off, make sure the AC adapter is securely plugged into the electrical outlet and the receiver is powered on. * If the Transmitter indicator LED is flashing red, charge or change the transmitter battery. * If the Transmitter is plugged into the charger, disconnect it.
N
ngonzalezAug 25, 2025
Why is the sound level inconsistent on my Shure device?
- F
  floresjesusAug 26, 2025
  If you are experiencing sound level variations when switching to different sources on your Shure device, adjust the transmitter gain as necessary.
I
Isaac ChenAug 25, 2025
Why does my Shure Receiver have audio dropouts?
- J
  Jessica HaleAug 25, 2025
  If you are experiencing audio artifacts or dropouts with your Shure Receiver, try changing the receiver and transmitter to a different group or channel. Identify and shut down or remove any nearby sources of interference, such as cell phones or Wi-Fi access points. Ensure the receiver and transmitter are within system parameters, set up within the recommended range, and kept away from metallic surfaces. For optimal sound, the transmitter must be used in the line of sight from the receiver. Charge or change transmitter battery.

Shure GLXD4 Specifications

General

Input voltage	14 - 18 V
Power supply type	AC
Battery life (max)	16 h
Current consumption	550 mA
Battery low indication	Yes
Impedance	50 Ω
Antenna type	Fixed
Display type	LCD
Mounting type	-
Product color	Black
Scan features	Channel scan, Group scan
Housing material	ABS
Antennas quantity	2
Channels quantity	8 channels
High density mode	No
Operating frequency type	Ultra High Frequency (UHF)
Radio Frequency (RF) range	2404 - 2478 MHz
Operating temperature (T-T)	-18 - 57 °C
Microphone frequency response	20 - 20000 Hz
Total Harmonic Distortion (THD)	0.2 %
XLR out	1