Shure MXA310 - Page 44

Shure Incorporated
44/76
MXA310 Response:
< REP x AUDIO_GAIN_POSTGATE yyyy >
Where yyyy takes on the ASCII val
ues of 0000 to 1400. yyyy is in steps
of one-tenth of a dB.
Set Post-Gate Audio Gain (firmware > v3.0)
Command String:
< SET x AUDIO_GAIN_POSTGATE yyyy >
Where x is ASCII channel number: 1
through 4. Where yyyy takes on the
ASCII values of 0000 to 1400. yyyy
is in steps of one-tenth of a dB.
MXA310 Response:
< REP x AUDIO_GAIN_POSTGATE yyyy >
Where yyyy takes on the ASCII val
ues of 0000 to 1400.
Get Channel Audio Mute
Command String:
< GET x AUDIO_MUTE >
Where x is ASCII channel number: 0
through 5. See table on page 1.
Channel Audio Mute is pre-meter.
MXA310 Response:
< REP x AUDIO_MUTE ON >
< REP x AUDIO_MUTE OFF >
The MXA310 will respond with one
of these strings.
Mute Channel Audio
Command String:
< SET x AUDIO_MUTE ON >
MXA310 Response:
< REP x AUDIO_MUTE ON >
Unmute Channel Audio
Command String:
< SET x AUDIO_MUTE OFF >
MXA310 Response:
< REP x AUDIO_MUTE OFF >
Toggle Channel Audio Mute