Shure MXA310 - Important Product Information

Shure Incorporated
67/76
Port
TCP/
UDP Protocol Description
Factory De
fault
8427 udp Multcast
SLP
Required for inter-device communication Open
64000 tcp Telnet Required for Shure firmware update Open
Dante Audio & Controller
Port TCP/UDP Protocol Description
162 udp SNMP Used by Dante
[319-320]* udp PTP Dante clocking
2203 udp Custom Required for packet bridge
4321,
14336-14600
udp Dante Dante audio
[4440, 4444,
4455]*
udp Dante Dante audio routing
5353 udp mDNS Used by Dante
[8700-8706,
8800]*
udp Dante Dante Control and Monitoring
8751 udp Dante Dante Controller
16000-65536 udp Dante Used by Dante
*These ports must be open on the PC or control system to access the device through a firewall.
These protocols require multicast. Ensure multicast has been correctly configured for your network.
Important Product Information
The equipment is intended to be used in professional audio applications.
Note: This device is not intended to be connected directly to a public internet network.
EMC conformance to Environment E2: Commercial and Light Industrial. Testing is based on the use of supplied
and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC perfor
mance.
Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this
equipment.
†
†
†
†