Shure PSM1000 User Manual

Shure Incorporated
20/40
•
•
•
Reset
Manual mode only. Resets network settings to the factory defaults.
Find All Network Devices (Find All)
Lists all network devices.
Scroll to any of the listed devices and press Show Info to view information about that device.
Press Flash to flash the LEDS of all devices on network
Press Back to return to previous screen
Additional Settings ( More )
Product ID
Displays product serial number.
Reset All
Restores the values on all networked devices to factory default settings.
FW Update
Displays the receiver firmware version that is currently stored in the transmitter. Press Download to transfer the update to
a receiver through the IR port.

Shure PSM1000 Specifications

General

Frequency Range	470–952 MHz (country dependent)
Operating Range	100 m (328 ft) (Typical)
Audio Input	XLR
Network Interface	Ethernet
Receiver Audio Output	XLR, 1/4" (6.3 mm) balanced/unbalanced
Receiver Battery Type	AA
Power Supply	100 to 240 V AC, 50-60 Hz
Weight	Varies by model (refer to specific model documentation)