- 9 -
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø 1*PS/2 mouse connector.
Ø 1*PS/2 Keyboard connector.
Ø 2*DB9 Serial connectors 16550 UART compatible.
Ø 1*Infrared communication port .
(Serial port COM2 can also be redirected to an external IrDA Adapter
for wireless connection.)
Ø 1*DB25 Parallel port supporting Standard Parallel Port (SPP),
Enhanced Parallel Port (EPP), and Extended Capabilities Port (ECP)
data transmission schemes.
Ø 1*Line-Out port.
Ø 1*Line-In port.
Ø 1*Mic-In port.
Ø 1*MIDI/GAME port.
- 6 USB1.1/USB2.0 Supported Onboard
Ø 2 USB connectors on back-panel and 2 sets of dual USB ports headers on
mid-board.
- PCI Bus Master IDE Controller Onboard
Two UltraDMA 133/100/66/33 Bus Master Dual-channel IDE ports provide
support to a maximum of four IDE devices (one Master and one Slave per chan-
nel). The IDE Bus implements the data transfer speed up to 133/100/66/33
MB/sec and also supports Enhanced PIO Modes 0~4.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
- ATX Power Supply Connector
ATX power supply unit can be connect to the onboard 20-pin ATX power
connector, supporting Suspend and Soft-On/Off by dual-function power
button.
- Advanced Configuration and Power Interface
Features four power saving modes: Snoop, Suspend to RAM, Suspend to
Disk, and Soft-Off. ACPI provides more efficient Energy Savings Features
controlled by your operating system that supports OS Direct Power Man-
agement (OSPM) functionality.
To Next Page
Loading...
