EasyManua.ls Logo

Shuttle AK32E - Page 14

Shuttle AK32E
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 10 -
- System BIOS
Provides licensed Award BIOS V6.0 PG on 2Mb Flash EEPROM and
supports Green PC, Desktop Management Interface (DMI).
- ATX Form Factor
System board conforms to the ATX specification.
Board dimension: 305mm* 244mm.
- Advanced Features
Ø Dual Function Power Button - The system can be in one of two states;
one is Suspend mode and the other is Soft-Off mode. Pushing the
power button for less than 4 seconds places the system into Suspend
mode. When the power button is pressed for longer than 4 seconds, the
system enters the Soft-Off mode.
Ø Wake-on-LAN (WOL) - The onboard WOL connector can be attached
to a network card that supports this function to wake up the system via
LAN.
Ø Modem Ring Power-On - The system can be powered on automatically
by the activation of modem ring.
Ø CPU Clock Setting- This item allows users to adjust CPU Host Clock in BIOS.
Ø CPU Ratio Setting- This item allows users to adjust CPU Ratio in BIOS.
Ø CPU Vcore Setting- This item allows users to adjust CPU Vcore in BIOS.
- Intelligent Features
Ø Voltage Monitoring - Monitors various voltages of key elements, such as
the CPU, and other critical system voltage levels to ensure stable current
passing through mainboard components. System voltages include +3.3VIN,
+5V, +12V, -12V, -5V on system etc.
Ø Fan Status Monitoring - To prevent CPU from overheating, the CPU fan is
monitored for RPM and failure. (CPU Cooling FAN with RPM sensor is
required.)
Ø Temperature Monitoring - This item allows users to make sure whether
the CPU or system runs in a suitable temperature.

Table of Contents

Related product manuals