EasyManua.ls Logo

SICK deTec4 Core Ex - Inappropriate Use; Requirements for the Qualification of Personnel

SICK deTec4 Core Ex
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.3 Inappropriate use
The safety light curtain works as an indirect protective measure and cannot provide pro‐
t
ection from parts thrown out nor from emitted radiation. Transparent objects are not
detected.
Among others, the deTec4 Core Ex safety light curtain is not suitable for the following
applications:
Outdoors
Underwater
At altitudes over 3,000 m above sea level
In environments with increased levels of ionizing radiation
2.4 Requirements for the qualification of personnel
The safety light curtain must be configured, installed, connected, commissioned and
ser
viced only by qualified safety personnel.
Project planning
For project planning, a person is considered competent when he/she has expertise and
experience in the selection and use of protective devices on machines and is familiar
with the relevant technical rules and national work safety regulations.
Mechanical mounting
For mechanical mounting, a person is considered competent when he/she has the
expertise and experience in the relevant field and is sufficiently familiar with the appli‐
cation of the protective device on the machine that he/she can assess its operational
safety status.
Electrical installation
For electrical installation, a person is considered competent when he/she has the
expertise and experience in the relevant field and is sufficiently familiar with the appli‐
cation of the protective device on the machine that he/she can assess its operational
safety status.
Commissioning
For commissioning, a person is considered competent when he/she has the expertise
and experience in the relevant field and is sufficiently familiar with the application of
the protective device on the machine that he/she can assess its operational safety sta‐
tus.
Operation and maintenance
For operation and maintenance, a person is considered competent when he/she has
the expertise and experience in the relevant field and is sufficiently familiar with the
application of the protective device on the machine and has been instructed by the
machine operator in its operation.
Maintenance and thorough checks should only be conducted by qualified, trained per‐
sonnel who are familiar with the regulations and instructions relating to explosion-haz‐
ardous environments, particularly:
Ignition protection methods
Mounting regulations
Regulations on distances to be maintained
2 S
AFETY INFORMATION
10
O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Ex 8017023/14Q6/2020-04-27 | SICK
Subject to change without notice

Table of Contents

Related product manuals