14.5 Deflector mirrors
14.5.1 Function and use
Overview
Deflector mirrors can be used to shape the protective field to secure hazardous points
from multiple sides using a single safety light curtain.
Figure 44: Example of use of deflector mirrors
Important information
DANGER
Hazard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of non-
observance.
b
Only mount deflector mirrors to solid walls or machine components. The position
of the deflector mirrors must not change after alignment.
b
Do not use deflector mirrors if contamination, beading water, condensation, or
frost on the deflector mirrors is to be expected.
b
Make sure that the deflector mirrors are intact and free of scratches, contamina‐
tion, beading water, condensation, frost, etc. at all times.
14.5.2 Mounting
To mount the deflector mirrors, use the included swivel mount brackets.
14.5.3 Change in scanning range using deflector mirrors
Overview
T
he information relates to 90° beam deflection per mirror and a protective field height
of 900 mm.
ACCESSORIES 14
8017023/14Q6/2020-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Ex
71
Subject to change without notice
To Next Page
Loading...
