SICK deTec4 Core Ex - Check During Commissioning and Modifications

LEDs Meaning
Alignment quality light emitting
diode
s
OSSD
1 2 3 4
O Blue o o o O R
ed
Alignment is insufficient or the protective
f
ield is interrupted at least partially.
O Blue O Blue o o O R
ed
Alignment is insufficient or the protective
f
ield is interrupted at least partially.
O Blue O Blue o o O Gr
een
Alignment is not yet sufficient for stable
a
vailability.
O Blue O Blue O Blue o O Gr
een
Alignment is good, stable availability.
1)
O Blue O Blue O Blue O Blue O Gr
een
Alignment is very good.
o LED of
f. Ö LED flashes. O LED illuminates.
1)
If the protective fields are very wide, there is a possibility that all four alignment quality LEDs will not light
up even when alignment is good.
7.5 Check during commissioning and modifications
The test is intended to ensure that the hazardous area is monitored by the protective
de
vice and that unprotected access to the hazardous area is prevented.
b
C
arry out the checks according to the instructions from the manufacturer of the
machine and from the operating entity.
COMMISSIONING 7
8017023/14Q6/2020-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Ex
51
Subject to change without notice