SICK deTec4 Core Ex - 16 List of Figures

16 List of figures
1. Sender and receiver................................................................................................... 11
2. Device overview.......................................................................................................... 12
3. Sender indicators....................................................................................................... 13
4. Receiver indicators..................................................................................................... 13
5. Hazardous point protection........................................................................................14
6. Access protection....................................................................................................... 14
7. Hazardous area protection.........................................................................................15
8. Minimum distance to the hazardous point for orthogonal (rectangular) approach
t
o the protective field..................................................................................................19
9. Representation of the accessibility of electro-sensitive protective device by reach‐
ing over. Left: Protective field that cannot be reached over. Right: Protective field
that can be reached over........................................................................................... 20
10. Minimum distance from reflective surfaces............................................................. 20
11. Graph of minimum distance from reflective surfaces............................................. 21
12.
Preventing mutual interference from system 1 and s
ystem 2............................. 21
13.
Trouble-free operation due to reversed direction of transmission of system 1 and
s
ystem 2.................................................................................................................... 22
14. Dual-channel and isolated connection of OSSD1 and OSSD2................................23
15. No potential difference between load and protective device.................................. 23
16. Schematic representation of operation with restart interlock.................................25
17. Connection diagram for RLY3-OSSD2 with restart interlock and external device
monit
oring................................................................................................................... 26
18. Test rod check: Step 1................................................................................................29
19. Test rod check: Step 3................................................................................................29
20. Mounting the safety light curtain in the explosion-proof enclosure........................ 33
21. Aligning the safety light curtain in the explosion-proof enclosure...........................34
22. Mounting of the handles............................................................................................ 35
23. Sender and receiver must not be installed such that they are rotated 180° relative
to each other...............................................................................................................36
24. Mounting the safety light curtain without the alignment bracket........................... 37
25. Step 1.......................................................................................................................... 38
26. Step 2.......................................................................................................................... 38
27. Steps 3 and 4..............................................................................................................38
28. Mounting the safety light curtain using the alignment brackets.............................39
29. Assembling the alignment brackets.......................................................................... 39
30. Steps 1 to 6.................................................................................................................40
31. Step 7.......................................................................................................................... 40
32. Step 8.......................................................................................................................... 41
33. Steps 9 and 10........................................................................................................... 41
34. Steps 11 and 12.........................................................................................................42
35. Dual-channel and isolated connection of OSSD1 and OSSD2................................45
36. No potential difference between load and protective device.................................. 45
37. Alignment bracket: rotate...........................................................................................50
38. Dimensional drawing, sender and receiver, protective field height 600 mm.........64
39. Dimensional drawing, sender and receiver, protective field height 900 mm.........65
40. Dimensional drawing, sender and receiver, protective field height 1,200 mm......66
41. Dimensional drawing, sender and receiver, protective field height 1,500 mm......67
42. Dimensional drawing of the FlexFix bracket with riser (2074627)......................... 69
43. Dimensional drawing of the alignment bracket (2072525).................................... 70
44. Example of use of deflector mirrors.......................................................................... 71
16 LIS
T OF FIGURES
76
O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Ex 8017023/14Q6/2020-04-27 | SICK
Subject to change without notice