Need help?Do you have a question about the SICK C 4000 and is the answer not in the manual?
General| Brand | SICK |
|---|---|
| Model | C 4000 |
| Category | Lighting Equipment |
| Language | English |
Describes the purpose and scope of the manual.
Identifies the intended audience for the manual.
Defines the applicability of the instructions.
Lists the topics covered in the manual.
Lists and defines acronyms used in the document.
Explains the meaning of icons and symbols.
Defines who is qualified to install, commission, and service the device.
Details the intended uses and type of safety equipment.
Specifies how the device should and should not be used.
Outlines essential safety procedures and regulations.
Provides guidelines for environmentally responsible disposal.
Highlights unique capabilities of the C 4000 Standard and Advanced.
Explains how the light curtain functions and its components.
Illustrates typical scenarios where the light curtain is applied.
Describes the meaning of LEDs and 7-segment displays.
Explains the safety function to prevent automatic machine restart.
Details how to monitor external safety contactors.
Describes the integration of emergency stop buttons.
Explains the function to temporarily disable the protective field.
Describes the configurable diagnostic output signal.
Explains how to prevent interference in multi-sensor setups.
Details how to set the detection range based on resolution.
Introduces the function to ignore specific beams.
Explains blanking a specific area permanently.
Explains blanking a movable area.
Details how blanking affects the device's resolution.
Describes how to define blanked areas using teach-in.
Explains the function to ignore minor beam interruptions.
Describes the built-in test function for the sender.
Lists incompatible configuration options.
Crucial for safe operation, explains calculation methods.
Advises on avoiding false triggers from reflections.
Provides general guidelines for physical installation.
Details the installation using a specific mounting accessory.
Details the installation using an alternative mounting accessory.
Explains the main system wiring.
Details the connection for device configuration.
Describes wiring for cascaded systems.
Explains wiring for monitoring external contactors.
Details wiring for the reset function.
Describes wiring for the teach-in function switch.
Explains wiring for emergency stop inputs.
Describes wiring for the bypass function switch.
Details wiring for the configurable output signal.
Explains wiring for the sender test input.
Briefly mentions integration with other SICK systems.
Describes device status indicators during startup.
Explains the critical process of optical alignment.
Covers essential tests for verifying safety and functionality.
Outlines default configurations upon delivery.
Details prerequisites and tools for device configuration.
Provides instructions for cleaning the optical surfaces.
Guides users on initial steps for troubleshooting.
Information on contacting technical support.
Explains LED error codes.
Explains 7-segment display error codes.
Summarizes status indicators for sender and receiver.
Points to advanced diagnostic tools.
Provides detailed technical data and parameters.
Specifies system response times under various conditions.
Lists the weight of the device and accessories.
Shows the physical dimensions of the device and mounting options.
Lists what is included in the standard package.
Provides part numbers for devices without extension.
Provides part numbers for devices with extension.
Lists part numbers for protective front screens.
Lists part numbers for deflector mirrors.
Lists part numbers for various accessories.
Official statement of compliance with EC directives.
A guide for OEMs to ensure proper installation.
An index of all tables in the document.
An index of all figures in the document.
To Next Page
