Operating Instructions Chapter 13
C 4000 Standard/Advanced
8 009 861/OE59/19-11-04 © SICK AG • Industrial Safety Systems • Germany • All rights reserved
93
Annex
13.3 List of tables
Tab. 1: Comparison of the special features and configurable functions of the
C 4000 .................................................................................................................... 13
Tab. 2: Status indicators of the sender ............................................................................. 16
Tab. 3: Status indicators of the receiver............................................................................ 17
Tab. 4: Permissible configuration of the restart interlock ................................................ 19
Tab. 5: Possible configuration for the output signal ......................................................... 23
Tab. 6: Physical resolution and scanning range................................................................ 24
Tab. 7: Scanning range when using 1 or 2 deflector mirrors........................................... 24
Tab. 8: Overview of the blanking function ......................................................................... 25
Tab. 9: Types of object monitoring for floating blanking................................................... 29
Tab. 10: Effective resolution for blanking with size tolerance............................................ 31
Tab. 11: Effective resolution for floating blanking with partial object monitoring and
for fixed blanking with increased size tolerance................................................... 32
Tab. 12: Effective resolution and maximum size of moving objects under reduced
resolution ................................................................................................................ 34
Tab. 13: Functions that cannot be combined...................................................................... 36
Tab. 14: Pin assignment system connection M26)×)11 + FE.............................................. 47
Tab. 15: Pin assignment configuration connection M8)×)4................................................. 48
Tab. 16: Pin assignment extension connection M26)×)11 + FE.......................................... 49
Tab. 17: Displays shown during the power-up cycle ........................................................... 56
Tab. 18: Display values during the alignment of sender and receiver............................... 57
Tab. 19: Delivery status of the C 4000................................................................................ 59
Tab. 20: Error displays of the LEDs...................................................................................... 61
Tab. 21: Error displays of the 7-segment display ................................................................ 62
Tab. 22: Status indicators of the sender ............................................................................. 64
Tab. 23: Status indicators of the receiver............................................................................ 65
Tab. 24: Technical data C 4000........................................................................................... 66
Tab. 25: Determining the response time of a C 4000 system ........................................... 69
Tab. 26: Number of beams depending on the protective field height and the
physical resolution.................................................................................................. 71
Tab. 27: Response time as factor of the number of beams............................................... 71
Tab. 28: Weight of sender and receiver............................................................................... 72
Tab. 29: Weight of the deflector mirrors PNS 75 and PNS 125......................................... 72
Tab. 30: Dimensions dependent on the protective field height, C 4000
Standard/Advanced without extension connection ............................................. 73
Tab. 31: Dimensions dependent on the protective field height, C 4000 Standard
with angled system connection and without extension connection.................... 74
Tab. 32: Dimensions dependent on the protective field height, C 4000
Standard/Advanced with extension connection................................................... 75
Tab. 33: Dimensions for the deflector mirror PNS 75 dependent on the mirror
height .................................................................................................................... 77
Tab. 34: Dimensions for the deflector mirror PNS 125 dependent on the mirror
height .................................................................................................................... 78
To Next Page
Loading...
Need help?
General
