Chapter 1 Operating Instructions
C 4000 Standard/Advanced
6 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8 009 861/OE59/19-11-04
About this document
1 About this document
Please read this chapter carefully before working with this documentation and the C 4000.
1.1 Function of this document
These operating instructions are designed to address the technical personnel of the
machine manufacturer or the machine operator in regards to safe mounting, installation,
configuration, electrical installation, commissioning, operation and maintenance of the
safety light curtain C 4000.
These operating instructions do not provide instructions for operating machines on which
the safety light curtain is, or will be, integrated. Information on this is to be found in the
appropriate operating instructions of the machine.
1.2 Target group
These operating instructions are addressed to planning engineers, developers and the
operators of plants and systems which are to be protected by one or several safety light
curtains C 4000. It also addresses persons who integrate the C 4000 into a machine,
initialise its use, or who are in charge of servicing and maintaining the unit.
1.3 Scope
These operating instructions apply to the safety light curtain C 4000 Standard and C 4000
Advanced with the following entry on the type label in the field Operating Instructions:
8 009 855/OE59. This document is part of SICK part number 8 009 855/OE59 (operating
instructions “C 4000 Safety Light Curtain” in all available languages).
For the configuration and diagnostics of these devices you require CDS (Configuration &
Diagnostic Software) version 2.10 or higher. To determine the version of your software
version, select the Module-Info... option in the ? menu.
1.4 Depth of information
These operating instructions contain information on:
$ installation and mounting
$ electrical installation
$ commissioning and configuration
$ care and maintenance
$ fault, error diagnosis and
troubleshooting
$ part numbers
$ conformity and approval
of the safety light curtain C 4000.
Planning and using protective devices such as the C 4000 also require specific technical
skills which are not detailed in this documentation.
When operating the C 4000, the national, local and statutory rules and regulations must
be observed.
General information on health and safety at work and accident prevention using opto-elec-
tronic protective devices can be found in the brochure “Safe Machines with opto-electronic
protective devices”.
Note
To Next Page
Loading...
Need help?
General
