SICK deTec4 Ex - Flexible Control Cabinet Cabling and Status Indication on both Sides; Status Indicators

3.2.9 Flexible control cabinet cabling and status indication on both sides
The safety light curtain can be connected to the control cabinet in different ways as
r
equired:
•
Separate connecting cables for sender and receiver
•
Separate connecting cables for sender and receiver with connection in the control
cabinet
The OSSD status and the status of the protective field are indicated via LEDs on the
sender and receiver when the following applies:
•
The sender and receiver are connected to one another in the control cabinet
If the sender and receiver are not connected to each other, this status information is
only indicated at the receiver.
Further topics
•
"C
onnection diagrams", page 38
3.2.10 Status indicators
Overview
T
he sender and receiver LEDs indicate the operational status of the safety light curtain.
Sender indicators
!
"
§
Figure 4: Sender indicators
T
he sender has one laser alignment aid and at least two light emitting diodes, which
indicate the operational status:
3 P
RODUCT DESCRIPTION
18
O P E R A T I N G I N S T R U C T I O N S | deTec4 Ex 8022883/2019-03-07 | SICK
Subject to change without notice