SICK deTec4 Ex - Page 4

4.5.1 Test rod check.......................................................................... 39
4.5.2 Visual check of the machine and the protective device........ 42
5 Mounting............................................................................................. 43
5.1 Safety......................................................................................................... 43
5.2 Unpacking.................................................................................................. 44
5.3 Mounting the system plug........................................................................ 44
5.4 Mount the safety light curtain in the explosion-proof enclosure (only
if t
he safety light curtain is used in North America)............................... 45
5.5 Mount the optional cable gland............................................................... 47
5.6 Mount the handles to the cover of the explosion-proof enclosure........ 47
5.7 Installation................................................................................................ 48
5.7.1 Mounting the safety light curtain without alignment
bracket...................................................................................... 50
5.7.2 Mounting the safety light curtain with alignment bracket.... 52
6 Electrical installation........................................................................ 56
6.1 Safety......................................................................................................... 56
6.2 System connection (flying leads, 8-wire)................................................. 58
7 Configuration..................................................................................... 60
7.1 Overview.................................................................................................... 60
7.2 Factory settings......................................................................................... 60
7.2.1 Reset to factory settings......................................................... 61
7.3 Configuration mode.................................................................................. 62
7.4 Configuring beam coding......................................................................... 62
7.5 Configuring the restart interlock.............................................................. 63
7.6 Configuring external device monitoring (EDM)....................................... 64
7.7 Configuring application diagnostic output.............................................. 64
7.8 Status indication on both sides............................................................... 65
8 Commissioning.................................................................................. 66
8.1 Safety......................................................................................................... 66
8.2 Overview.................................................................................................... 67
8.3 Switching on.............................................................................................. 67
8.4 Sender and receiver alignment................................................................ 68
8.4.1 Aligning the sender and receiver............................................ 68
8.4.2 Alignment with the alignment bracket................................... 70
8.4.3 Indication of the alignment quality......................................... 71
8.5 Check during commissioning and modifications.................................... 72
9 Operation............................................................................................ 73
9.1 Safety......................................................................................................... 73
9.2 Regular thorough check........................................................................... 73
9.3 LEDs........................................................................................................... 73
10 Maintenance...................................................................................... 76
CONTENTS
4
O P E R A T I N G I N S T R U C T I O N S | deTec4 Ex 8022883/2019-03-07 | SICK
Subject to change without notice