Features
•
Short-circuit protected
•
Not electrically isolated from V
S
1)
Electrical values 0 V ≤ V
out
2)
≤ V
S
1)
Supply voltage.
2)
Output voltage.
NOTE
Provide an arc-suppression switch at the digital output if inductive load is present.
b
Attach a freewheeling diode directly to the load for this purpose.
NOTE
Capacitive loads on the digital outputs have an effect on the switch-on and switch-off
behavior. A maximum capacitance of 100 nF is the limit value.
Function assignment
NOTE
Control the digital outputs in the device with the API functions. In order to assign the
digital output functions, use an installed SensorApp which contains this function.
6 ELECTRICAL INSTALLATION
36
O P E R A T I N G I N S T R U C T I O N S | InspectorP62x 8024439/1EJ6/2022-02 | SICK
Subject to change without notice
To Next Page
Loading...
