SICK InspectorP62 Series User Manual

Table 11: Characteristic data of the digital outputs
Switching behavior PNP switching to supply voltage V
S
Default: No function
Logic: not inverted (active high)
Properties
•
Short-circuit protected
•
Not electrically isolated from V
S
1)
Electrical values 0 V ≤ V
out
2)
≤ V
S
1)
Supply voltage.
2)
Output voltage.
NOTE
Provide an arc-suppression switch at the digital output if inductive load is present.
b
Attach a freewheeling diode directly to the load for this purpose.
NOTE
Capacitive loads on the digital outputs have an effect on the switch-on and switch-off
behavior. A maximum capacitance of 100 nF is the limit value.
Function assignment
NOTE
Control the digital outputs in the device with the API functions. In order to assign the
digital output functions, use an installed SensorApp which contains this function.
ELECTRICAL INSTALLATION 6
8024439//2019-06 | SICK O P E R A T I N G I N S T R U C T I O N S | InspectorP621
39
Subject to change without notice

SICK InspectorP62 Series Specifications

General

Brand	SICK
Model	InspectorP62 Series
Category	Analytical Instruments
Language	English