If the RSSI value is 0, then no distance measurement is possible. There can be two
reasons for this:
•
The target object lies outside the sensing range.
•
The target object has an extremely low remission.
Please note that white paper can have very similar values as a reflector at a short
distance.
The RSSI values are sensor-specific, relative values that can vary slightly between
different devices and during the service life of the device.
3 PRODUCT DESCRIPTION
34
O P E R A T I N G I N S T R U C T I O N S | multiScan136 8027119/0000/2022-11 | SICK
Subject to change without notice
To Next Page
Loading...
