SICK UE402 - Scope of configurable functions

Operating Instructions Chapter 3
UE402
8009874/YT67/2016-02-22 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 19
Subject to change without notice
Product description
3.4.1 Scope of configurable functions
The configurable functions of the C4000 have different scopes (cf. Tab. 2). The scope
depends on whether …
 the function can be configured separately for every individual system in a cascade or
only for the entire cascade.
 the function can be configured separately for every operating mode or only for the entire
application.
Depending on the scope of the function in question, you can find the corresponding setting
in CDS under the System or Operating mode options of the CDS configuration dialog.
Scope
Function that can be configured
All the systems of a cascade An individual system All operating modes One operating mode
Rotation of the 7>segment display  
PSDI mode  
PSDI window  
Beam coding  
External device monitoring (EDM)  
Reduced resolution  
Scanning range  
Type of bypass switch  
Enable bypass  
Emergency stop-input  
Fixed blanking  
Floating blanking  
Teach-in  
Type of restart interlock (internal/external)  
Type of reset button  
Connection site of the reset button  
Signal output  
Tab.
2
:
Scope of configurable
functions