Operating Instructions Chapter 7
UE402
8009874/YT67/2016-02-22 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 29
Subject to change without notice
Configuration
7 Configuration
7.1 Preparing the configuration
The UE402 does not have its own configuration connection. It is configured exclusively
directly at the configuration connection of a connected safety light curtain.
How to prepare the configuration:
Plan all the necessary settings (operating modes, restart, PSDI mode, etc.).
Ensure that the UE402 and the safety light curtain C4000 are correctly assembled and
that the electrical connections are also correct.
For the configuration of the UE402 and the connected safety light curtain you will need:
CDS (Configuration & Diagnostic Software) on CD>ROM
user manual for CDS on CD>ROM
PC/notebook with Windows 9x/NT 4/2000 Professional/XP and a serial interface
(RS>232). PC/notebook not included
connecting cable between PC and C4000
To configure the device, please read the user manual for the CDS (Configuration &
Diagnostic Software) and use the online help function of the programme.
To Next Page
Loading...
