Chapter 4 Operating Instructions
UE402
22 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8009874/YT67/2016-02-22
Subject to change without notice
Installation and mounting
4 Installation and mounting
T
he UE402 has been designed for assembly on a mounting rail. The positioning place
must at least comply with enclosure rating IP 54.
The following steps are necessary after mounting and installation:
making the electrical connections (chapter 5)
testing the installation (To this end you should read the section titled “Test notes” in the
safety light curtain C4000 operating instructions.)
To Next Page
Loading...
