Need help?Do you have a question about the SICK UE403 and is the answer not in the manual?
General| Number of safety outputs | 2 |
|---|---|
| Safety integrity level | SIL3 |
| Performance level | PL e |
| Protection class | IP20 |
| Housing material | Plastic |
| Supply Voltage | 24 V DC |
| Response Time | 20 ms |
| Temperature Range | -25 °C ... +55 °C |
| Number of inputs | 2 |
| Category | Category 4 |
| Connection type | Screw terminals |
Explains the purpose and scope of the operating instructions for the UE403.
Identifies the intended audience for these operating instructions.
Outlines the topics covered in the document for the UE403.
Defines what the operating instructions cover and their applicability.
Lists and defines abbreviations used throughout the manual.
Explains the meaning of symbols and icons used in the document.
Defines the requirements for personnel installing and servicing the device.
Describes the intended use and limitations of the UE403 switching amplifier.
Specifies how the UE403 switching amplifier must be used to maintain warranty.
Provides crucial safety guidelines for operating the UE403 and M4000.
Covers responsible handling and disposal of the UE403 switching amplifier.
Details how to properly dispose of the device according to regulations.
Guides on separating materials for recycling purposes.
Lists the key features and capabilities of the UE403 switching amplifier.
Explains how the UE403 processes signals from the M4000 and connected devices.
Shows a practical example of the UE403 used in a muting application.
Describes the meaning of status LEDs on the UE403 and other indicators.
Instructions for attaching the UE403 to the M4000 safety device.
Specific method for mounting the UE403 on the back of the M4000.
Specific method for mounting the UE403 on the side of the M4000.
Guidelines for installing the UE403 on a separate system component.
Details the pin assignment and connection for the system power and communication.
Explains connections for up to four muting sensors to the UE403.
Describes the connection for a muting lamp to the UE403.
Details connection for reset, override, or belt stop signals.
Explains the connection for configuring the UE403 via a serial interface.
Wiring diagram for a typical setup with M4000 and UE10-30S.
Wiring diagram for a setup with M4000 A/P and UE10-30S.
Wiring diagram for a setup with M4000 A/P and a relay.
Steps to prepare for configuring the UE403 switching amplifier.
Explains how the configuration is saved and handled during device replacement.
Procedures for handling faults, errors, and lock-out status.
Information on contacting SICK for assistance with unresolved errors.
Explains LED indicators and their possible causes and remedies.
Details on using CDS software for advanced troubleshooting.
Comprehensive table of technical data for the UE403 switching amplifier.
Provides detailed drawings showing the physical dimensions of the UE403.
Dimensional drawing for the incandescent version of the muting lamp.
Dimensional drawing for the LED version of the muting lamp.
Lists the part number for the UE403 and its delivery contents.
Provides part numbers for various connection cables and accessories.
Official declaration stating product conformity with EC directives.
A checklist for installers to ensure correct installation of the ESPE.
An index of all tables included in the document.
An index of all figures and illustrations in the document.
To Next Page
