Operating Instructions Chapter 1
UE403
8010854/WP71/2012-11-28 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 5
Subject to change without notice
About this document
1 About this document
Please read this chapter carefully before working with this documentation and the UE403
switching amplifier.
1.1 Function of this document
These operating instructions are designed to address the technical personnel of the
machine manufacturer or the machine operator in regards to safe mounting, installation,
configuration, electrical installation, commissioning, operation and maintenance of the
UE403 switching amplifier in connection with the M4000 Advanced multiple light beam
safety device.
These operating instructions do not provide instructions for operating machines on which
the UE403 switching amplifier or the M4000 Advanced multiple light beam safety device
is, or will be, integrated. Information on this is to be found in the appropriate operating
instructions for the machine.
1.2 Target group
These operating instructions are addressed to planning engineers, machine designers and
operators of plants and systems which are to be protected by one or several M4000
Advanced multiple light beam safety devices in connection with a UE403 switching
amplifier. It also addresses people who integrate the UE403 into a machine, initialise its
use, or who are in charge of servicing and maintaining the device.
1.3 Depth of information
These operating instructions contain the following information on the UE403 switching
amplifier in connection with the M4000 Advanced multiple light beam safety device:
• mounting
• electrical installation
• commissioning and configuration
• fault, error diagnosis and
troubleshooting
• part numbers
• conformity and approval
Planning and using protective devices such as the M4000 Advanced also require specific
technical skills which are not detailed in this documentation.
When operating the UE403 in connection with the M4000 Advanced multiple light beam
safety device, the national, local and statutory rules and regulations must be observed.
General information on accident prevention using opto-electronic protective devices can
be found in the brochure “Safe Machines with opto-electronic protective devices”.
We also refer you to the SICK homepage on the Internet at
www.sick.com
Here you will find information on:
• sample applications
• a list of Frequently Asked Questions regarding the M4000 in connection with the UE403
switching amplifier
• these operating instructions in different languages for viewing and printing
• EC Declaration of Conformity
Note
To Next Page
Loading...
