Chapter 7 Operating Instructions
UE403
26 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8010854/WP71/2012-11-28
Subject to change without notice
Commissioning
7 Commissioning
Deploy the protective device in accordance with the instructions contained in the
chapter titled “Commissioning” of the M4000 Advanced multiple light beam safety
device operating instructions.
WARNING
Commissioning requires a thorough check by qualified safety personnel!
Before you operate a system protected by the M4000 Advanced multiple light beam safety
device in connection with the UE403 for the first time, make sure that the system is first
checked and released by qualified safety personnel. On this issue pay attention to the
notes in chapter “On safety” on page 8 and the test notes in the operating instructions for
the ESPE connected.
To Next Page
Loading...
