Chapter 1 Operating Instructions
UE403
6 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8010854/WP71/2012-11-28
Subject to change without notice
About this document
1.4 Scope
T
hese operating instructions are only applicable to the UE403 switching amplifier with the
following entry on the type label in the field Operating Instructions: 8010851_WP71. This
document is part of SICK part number 8010851 (operating instructions “UE403 —
S
witching amplifier” in all available languages).
For the configuration and diagnostics of these devices you require CDS (Configuration &
Diagnostic Software) version 3.1.0 or higher. To determine the software version, select the
Module-Info... option in the ? menu.
1.5 Abbreviations
Application diagnostic output = configurable signal output that indicates a specific status
of the protective device
SICK Configuration & Diagnostic Software = software for the configuration of your UE403
External device monitoring
Enhanced function interface = safe SICK device communication
Electro-sensitive protective equipment (e.g. M4000 or C4000)
M4000 Advanced multiple light beam safety device
Output signal switching device = switching output that drives the safety circuit
Programmable logic controller
Safety Data Link = SICK safety interface (connection for OSSD and EFI of an ESPE)
1.6 Symbols used
Recommendations are designed to give you some assistance in your decision-making
process with respect to a certain function or a technical measure.
Refer to notes for special features of the device.
Display indications reflect the state of the 7>segment display on an ESPE connected
(e.g. the M4000):
Alternating indication of characters, e.g. t and 2
Please consult the operating instructions of the ESPE for a detailed description of the
indicators.
LED symbols describe the status of an LED:
The LED is constantly illuminated.
The LED is flashing.
The LED is off.
Instructions for taking action are shown by an arrow. Read carefully and follow the
instructions for action.
WARNING
Warning!
A warning indicates an actual or potential risk or health hazard. They are designed to help
you to prevent accidents.
Read carefully and follow the warning notices!
Note
ADO
CDS
EDM
EFI
ESPE
M4000
OSSD
PLC
SDL
Recommendation
Note
,
,
Take action …
To Next Page
Loading...
