Operating Instructions Chapter 1
UE403
8010854/WP71/2012-11-28 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 7
Subject to change without notice
About this document
Software notes show the location in the CDS (Configuration & Diagnostic Software) where
y
ou can make the appropriate settings and adjustments.
T
he software notes contained in the operating instructions for the M4000 Advanced
multiple light beam safety device apply accordingly in connection with the UE403.
Sender and receiver
In drawings and diagrams, symbol denotes the sender and symbol denotes the
receiver of an electro-sensitive protective equipment.
The term “dangerous state”
The dangerous state (standard term) of the machine is always shown in the drawings and
diagrams of this document as a movement of a machine part. In practical operation, there
may be a number of different dangerous states:
• machine movements
• electrical conductors
• visible or invisible radiation
• a combination of several risks and hazards
To Next Page
Loading...
